#CNC USB CONTROLLER JERKY MOVEMENTS MANUAL#
6.1 Press TAB key will show manual move window, enter.
#CNC USB CONTROLLER JERKY MOVEMENTS HOW TO#
How to manually move lathe and adjust moving speed 5.4 For thickness of tool setting please set it in mach3 offset window.Then click auto tool zero clearing button, it starts to do auto tool guide.5.3 Copy the file m930.m1s in the CD we offered, save it and quit documents edit window.Pin Number should be corresponding with Inx of hardware card as follow output pin should be In4.5.1 Setting hardware port->input port, please tick Probe input signals.Config menu ->Pulley selection Please set the Max Spindle speed into 24000.Clockwise Output set 1, CCW output set 2.
4.5.3 Tick Use spindle motor Output and PWM Control, and.Please make sure that Output #1- Output #8 are ticked, other not.
3.1nder Mach3 configure menu, open IO port/pin, then.Now please modify the output code of drawing little circle into I, J Code.2.1.3 It is not smooth when drawing little circle, you can see many line segments.With this number become bigger, it moving When drawing small circles, if the machine dithers, you can modify.2.1.2 In general setting, choose “stop cv on angle>6 degree”.2.1.1 In general setting, please choose constant velocity mode.In Constant velocity mode, In a straight line corner, walked out of mach3 is rounded. Connect the VFD PE Pin and spindle shell to the ground.Please connect the ground wire (PE) of the inverter and the ground wire of the shaft to the earth.Solution: the problem is caused by interference.The problem: MACH3 software is stopping, status bar:.Problem Description: control cards, when suddenly turn on the spindle, or for spindle speed adjustment.1.Because of the interference, Mach3 cannot find the USB card.